Brightwater F.L.I. offer a wide range of products and processes for the treatment of
wastewater. Below you will find summary details for these along with links to
more information - please contact us if you require any further information or
would like to discuss your requirements in more detail.
|
Membrane
Bio-Reactor |
MEMBRIGHT® MBR |
|
 |
The Membright® MBR produces very high quality
effluent utilising flat sheet membrane panels within a biological reactor.
Typical effluent quality of less than 5mg/l BOD, 5mg/l SS, 1mg/l Amm-N. More
Info...
*NEW*
Package Plant available for small populations. |
|
|
|
Biological
Aerated Flooded Filter |
BIOBEAD® BAFF |
|
 |
The Biobead® BAFF is a high quality, high rate,
small footprint process suitable for application both in Secondary Treatment
for C removal, and Tertiary Treatment for Ammonia removal. In addition, the Biobead® can be applied in De-nitrification mode for nutrient removal. More
Info... |
|
|
|
|
Diffused
Aeration Systems |
AERATION |
|
 |
A full range of aeration equipment is available
from individual fine bubble diffusers through to complete aeration systems
including floor gear, pipework and air blowers. Rubber Membrane or Ceramic
Diffusers are available. More
Info...
|
|
|
|
Submerged
Aerated Filter |
HSAF® |
|
 |
Utilising Brightwater F.L.I. BMax® plastic ring media with
high specific surface area, offering higher treatment capacity within a
reduced footprint. HSAF® operates with a static media bed in normal operation
but the media can be readily fluidised for cleaning and de-sludging. More
Info...
*NEW*
HSAF®
Temporary treatment plants for hire.
*NEW*
HSAF®
Micro-site at www.hsaf.com
|
|
|
|
Moving/
Mobile Bed Bio-Reactor |
MBBR |
|
 |
The Brightwater F.L.I. MBBR utilises BMax® plastic ring
media operating in a moving bed mode to provide treatment in a wide range of
applications, in particular industrial wastes and high ammonia wastes such as
leachates. More
Info... |
|
|
|
Tertiary
Filtration |
FILTABEAD® Filter |
|
 |
The Filtabead® process is used in a tertiary
filtration mode to remove suspended solids and produces a high quality final
effluent. Robust plastic granular media is used rather than sand, for example,
to give a long life as well as the ability to vigorously air scour the media
bed to remove the solids. More
Info... |
|
|
|
|
Site
Services |
PROCESS SUPPORT SERVICES |
|
 |
Brightwater F.L.I. and ABiC F.L.I. offer a complete
range of Process & Engineering Support services utilising the combined
expertise and extensive experience of both organisations within the water and
wastewater treatment sectors. More
Info... |
Back to top
